location

Office No.104, Sahakar Niwas, Plot No.160/161, Rd no.2, Jawahar Nagar, Goregaon(West), Mumbai-400062

don't let the strom win

6 Tips & techniques for UPS Batteries | MSPL Group

02 Sep 2023
vector 14 Comment

The UPS is an essential component of your business's infrastructure. It delivers both primary and backup power to all of your computers and other equipment, ensuring the integrity of your company's data. The UPS's battery is a critical component; without it, the UPS would be useless. Batteries are made up of cells that hold chemically stored energy. Depending on how they're used, these cells can endure for years or only a few hours.

 

The longevity and reliability of UPS batteries are critical for ensuring stable power, ensuring safe system operation, and extending battery life. Keeping your UPS well maintained will extend the system lifespan. Ensuring proper maintenance of your UPS is crucial to maintaining a healthy system. Proper maintenance can even save money in the long run! 

 

Here are the 6 ways you can maintain your UPS battery to ensure it lasts for years to come.

 

-Safe installation

To avoid damage, make sure your UPS batteries are installed properly. It's important to remember that an uninterruptible power supply (UPS) is only as strong as its battery. When batteries are not installed or connected properly, it can lead to a complete power outage and potential damage to the system and devices connected to it. 

However, if your battery isn’t installed correctly or it's failing, then you could end up with some major issues. You might notice that some devices will turn off or show error messages like "No Power" even though there is power.

 

-Clean up your IT space

The UPS battery is the heart of a backup power system in today's complex IT environments. Servers, operating systems, virtualization platforms, and other technologies are expected to be managed by IT departments. Due to this complexity, rogue power settings such as unexpected shutdowns or frequent on-off cycling pose a danger of harming UPS batteries. These two typical habits can cause excessive battery wear and tear, resulting in premature battery replacements and lost productivity.

To protect your battery life cycle, follow these simple steps: 

The first step is to set up a UPS that is compatible with your environment. Identify the right type of UPS for your needs, selecting models with sufficient power ratings to accommodate all of your devices. 

The next step is to create an IT environment that will prevent rogue power settings from harming your batteries.

To get the most out of your investment, it's important to care for it properly. 

 

-Placement of the batteries:

When a power interruption occurs, the Uninterruptible Power Supply (UPS) kicks in to keep your equipment running. However, if there is an issue with the UPS battery, it will not work properly. This can lead to potential damage to your equipment.

Here are some ways to avoid this damaging result:

1.Examine the position of your UPS batteries to ensure that they are appropriate for your environment. If you don't have air conditioning and live in a humid area, you should invest in batteries that are intended for these conditions.

2.Check that the battery terminals are firmly attached and tight-fitting to avoid them coming free during a power loss.

3.Monitor your battery levels and replace them when necessary.

 

- Protection from rust

You may not think that your UPS batteries need protection, but they do. If you don’t protect your UPS batteries they will suffer from rust and will eventually stop working. Why risk damaging your expensive UPS batteries when it's easy to protect them? 

When your UPS battery ends up on the floor, it can be damaged by rust from moisture or spills that may have occurred as a result of a leaky pipe or dishwasher overflow. To avoid this from happening, place your UPS batteries on a sturdy shelf or stand at least one foot off the ground. This will allow you to keep them out of harm's way and prevent any water damage from occurring. So if you want to avoid the hassle of replacing an expensive UPS battery, make sure you take precautions so that they won't get damaged!

 

-Check the water level

When you first purchase a UPS, the first thing you need to do is check the water level in the batteries. This will minimize any damage to your equipment. However, this process is often forgotten. Before you know it, there’s a problem with your UPS and now your valuable data is at risk. 

These are some things you should know before checking your UPS battery levels. 

1)Make sure that the battery cells are filled with distilled water before installing them into the UPS battery compartment 

2)Be sure that all of the caps are tight and secure 

3)If using a wet cell design, be sure to install a new electrolyte solution at least every five years. This can be done by adding new electrolyte

 

-Replace batteries from time to time

UPS batteries are always in use, but they can wear out over time. UPS batteries typically last two to five years. So, when they're halfway through their life, they may need to be replaced. This is because batteries start losing their charging capacity and can't hold a charge for as long. And when that happens, your UPS is no longer able to keep up with demand and you could experience brownouts and blackouts. 

Luckily, we have the solution: we offer affordable replacement UPS batteries for any model and size of UPS systems and battery backup systems. For more information about our products, contact us today!

 

Keeping your UPS well maintained will extend the system lifespan. Ensuring proper maintenance of your UPS is crucial to maintaining a healthy system. Proper maintenance and other tips and tricks can even save money in the long run!


-Email us at marketing@msplgroup.com

-Call on +91 96960 86262/ 022-40991100     


 

 

 


MSPL Logo

Comments

Leave a Comment

Your email address will not be published.

Request a Quote